Loading ...
Loading ...
Loading ...
©
2020 DJI All Rights Reserved.
47
MATRICE 300 RTK User Manual
Discharging
a. When the charger and external battery are connected at the same time, the charger supplies power
to the remote controller.
b. When only the external battery is connected, the external battery will supply power to the remote
controller. However, once the external battery is exhausted, the internal battery will supply power.
Linking
When the Smart Controller is purchased together with an aircraft, the remote controller has already been
linked to the aircraft, and they can be directly used after activating the remote controller and aircraft.
If the Smart Controller and the aircraft were purchased separately, follow the steps below to link the
remote controller to the aircraft.
Method 1: Using Smart Controller Buttons
1. Power on the remote controller and the aircraft.
2. Press the customizable button C1, C2, and Record button simultaneously. The status LED blinks blue
and the controller beeps twice to indicate the linking has started.
3. Press the linking button on the aircraft. The remote controller’s status LED will be solid green if the
linking is successful.
Method 2: Using DJI Pilot
1. Power on the remote controller and the aircraft. Tap “Pilot” on the homepage and log in using a DJI
account.
2. Tap “Enter Device”, select “Connect to the aircraft”, and follow the prompts to start linking.
3. Select “Enter the Camera View” and tap in camera view. Scroll to the bottom, tap “Remote
Controller Linking” and tap “OK” to conrm.
4. The status LED blinks blue and the remote controller beeps twice to indicate the linking has started.
5. Press the linking button on the aircraft. The remote controller's status LED will be solid green if the
linking is successful.
Method 3: Using Quick Settings
1. Power on the remote controller and the aircraft.
2. Swipe down from the top of the screen to open Quick Settings. Tap
to start linking.
3. The status LED blinks blue and the remote controller beeps twice to indicate the linking has started.
4. Press the linking button on the aircraft. The remote controller's status LED will be solid green if the
linking is successful.
Make sure the remote controller is within 1.6 ft (0.5 m) of the aircraft during linking.
Make sure the remote controller is connected to the internet when logging in using a DJI
account.
Loading ...
Loading ...
Loading ...