CP.EN.00000221.01 User Manual

Loading ...

MATRICE 300 RTK User Manual

Installing the Batteries

Pairing Batteries

Before rst use, it is recommended to mark 2 batteries as a pair and continue using them as a pair (charge

and discharge them together) to maximize service life and ensure ight performance. If two batteries

with a signicant dierence in battery life are installed and powered on, a prompt will pop up in the app

to recommend that you replace the batteries to a pair with similar performance.

Replacing the Batteries When Turned On

If the battery needs to be replaced immediately after landing, you can replace it without turning off

the aircraft. Replace with one fully charged battery, and wait for 3 seconds, and then replace another

battery.

Heating the Battery

Manual Heating: If the Intelligent Flight Battery is not installed into the aircraft, press and hold the

battery level button on the battery for four seconds to initiate the self-heating, keeping the batteries at a

temperature between 61° F (16° C) and 68° F (20° C), which is the ideal range of operating temperature,

for approximately 30 minutes. Press and hold the battery level button for two seconds to stop heating.

Auto Heating: Insert the batteries into the aircraft and power it on. If a low battery temperature is

detected, the battery will automatically heat up to maintain a temperature between 61° F (16° C) and

68° F (20° C).

Low Temperature Notice:

1. The performance of the intelligent Flight Battery is signicantly reduced when ying in low temperature

environments (temperatures below 5℃). Ensure that the battery is fully charged and the cell voltage

is at 4.4 V before each ight.

2. End the flight as soon as DJI Pilot displays the “Low Battery Level Warning” in low temperature

environments. You will still be able to control the aircraft’s movement when this warning is triggered.

3. In extremely cold weather, the battery temperature may not be high enough even after warming up. In

Turning On / O

The battery can only be turned on and off after it is installed on the

aircraft.

Turning On: Press the Power button once, then press again and hold for 3

seconds to turn on. The Power LED will turn green and the Battery Level

Indicators will display the current battery level.

Turning O: Press the Power button once, then press again and hold for

3 seconds to turn o. The Power LED and the Battery Level Indicators will

be o.

Loading ...

Dji CP.EN.00000221.01 Matrice 300 Commercial Quadcopter with RTK