Loading ...
Loading ...
Loading ...
60
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
Calibrating the Compass
After the remote controller is used in places with electro-magnetic interference, the compass may need
to be calibrated. A warning prompt will appear if the remote controller’s compass requires calibration.
Tap the warning pop-up to start calibrating. In other cases, follow the steps below to calibrate your
remote controller.
1. Enter the App Center, tap
, and scroll down and tap Compass.
2. Follow the diagram on the screen to calibrate your remote controller.
3. The user will receive a prompt when the calibration is successful.
Blocking Third-party Notications
To ensure safe ight, we recommend to disable third-party notications before each ight. Follow the
steps below to disable third-party notications.
1. Enter the App Center, tap
, and scroll down and tap Notications.
2. Enable “Aerial Photography Do Not Disturb Mode”.
HDMI
A monitor can display the remote controller’s interface by connecting the remote controller to a monitor
using a HDMI cable. Follow the steps below to enable the HDMI connection.
1. Swipe down from the top of the screen to open Quick Settings.
2. Follow the diagram on the screen to calibrate your remote controller. Tap HDMI to enable or disable
the HDMI connection. Hold to enter settings and adjust HDMI resolution, rotation, output mode, and
screen zoom.
Loading ...
Loading ...
Loading ...