Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
81
Electrical connection
The wine unit is supplied with a mains
cable with moulded plug ready for con-
nection to an earthed socket.
The socket must be easily accessible
after the wine unit has been installed. If
the socket is not easily accessible, en-
sure that a suitable means of discon-
nection is provided on the installation
side for each pole.
Risk of fire from overheating.
Connecting the wine unit to a multi-
socket adapter or to an extension
lead can overload the mains connec-
tion cable.
For safety reasons, do not use an ex-
tension lead or multi-socket adapter.
The electrical system must comply with
local and national safety regulations
(BS7671 in the UK).
For safety reasons, we recommend us-
ing a type residual current device
(RCD) in the assigned electrical installa-
tion for connecting the wine unit.
If the mains connection cable is dam-
aged, it must only be replaced with a
specific mains connection cable of the
same type (available from the Miele
Customer Service Department). For
safety reasons, such replacement may
only be carried out by a qualified spe-
cialist or the Miele Customer Service
Department.
These operating instructions and the
data plate indicate the nominal power
consumption and the appropriate fuse
rating. Compare this information with
the data of the on-site electrical con-
nection.
If in any doubt, consult a qualified elec-
trician.
Do not connect the wine unit to a
stand-alone inverter such as those used
with an autonomous power supply, e.g.
solar power. When the wine unit is
switched on, power surges could result
in an auto switch-off. This could dam-
age the electronic module.
Loading ...
Loading ...
Loading ...