Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
57
This appliance should be installed in a
dry, well-ventilated room.
When deciding on the installation site,
please bear in mind that the energy
consumption increases if the wine unit
is installed near to a heater, a cooker or
another appliance that gives off heat.
Direct sunlight should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the wine unit, please
note the following:
- The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
- The plug and mains connection cable
must not touch the rear of the wine
unit as they could be damaged by vi-
brations from the wine unit.
- Do not plug in other appliances into
sockets behind this wine unit.
Danger from broken glass!
Danger of injury from broken glass.
If installed at altitudes above 1500m
there is a risk of the glass in the door
breaking because of changes in air
pressure. Shards of glass can cause
severe injury if not handled with care.
Risk of damage due to high hu-
midity.
In environments with high humidity,
condensation can build up on the ex-
ternal wine conditioning unit panels,
which can cause corrosion.
Install the wine conditioning unit with
sufficient ventilation in a dry and/or
air-conditioned room.
After installation, make sure that the
appliance door closes properly, the
ventilation gaps are not covered and
that the wine conditioning unit has
been installed in accordance with
these operating and installation in-
structions.
Loading ...
Loading ...
Loading ...