Loading ...
Loading ...
Loading ...
Problem solving guide
50
Display warnings
Message Cause and remedy
The alarm symbol is
lit in the display and
both sensors for the
wine conditioning zones
are flashing in the con-
trol field. Furthermore,
an audible alarm is also
sounding.
The door alarm has been activated.
Close the appliance door. Both sensors for the
wine conditioning zones and the alarm symbol
will go out and the audible alarm will stop.
The alarm symbol is
flashing in the display,
and the sensor for one
of the wine conditioning
zones is also flashing.
An alarm tone is also
sounding.
The temperature in the zone concerned has risen
higher or fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– The ventilation gaps have been blocked.
– A prolonged power cut (power outage) has oc-
curred.
Rectify the cause of the alarm. The alarm sym-
bol goes out and the sensor for the affected
wine conditioning zone lights up again constantly.
The alarm will stop.
The Change Active
AirClean filter symbol
is lit up.
This is the reminder to change the Active AirClean fil-
ter.
Replace the Active AirClean filter and then confirm
the filter change in settings mode (see “Active
AirClean Filter”).
A dash is lit up up/flash-
ing in the display.
Only temperatures within the range the wine condi-
tioning unit can display will be shown.
“F0”, “F1”, “F8”,“E1”, “E2”,
“E7” or “E8” appears in
the display.
There is a fault.
Call Service.
Loading ...
Loading ...
Loading ...