Loading ...
Loading ...
Loading ...
Guide to the appliance
18
Using the door-opening mech-
anism correctly
The Push2open system on your wine
unit makes it easy to open the appli-
ance door. The appliance door on your
wine unit is sensitive to pressure.
The Push2open system is deactivated
at the factory. The function has to be
activated by touching the On/Off
sensor once the appliance has been
installed in the niche (see “Switching
the wine unit on and off”).
Opening the appliance door
Risk of damage from incorrect
handling of the door-opening mech-
anism.
Obstructing the appliance door while
opening it, or pushing in or holding
onto the door-opening mechanism
while the door is closing, may cause
damage to the door-opening mech-
anism.
Do not handle the door-opening
mechanism in this way.
To bring the door-opening mechan-
ism into its original position if neces-
sary, remove the plug and reconnect
it again after 5seconds.
Press briefly against the top left-
hand side of the appliance door
and then release it. The appliance
door will then open a little way auto-
matically.
Then pull the appliance door fully
open.
To protect against inadvertent open-
ing, if you do not pull the appliance
door open, it will close again by itself
after approximately 3seconds.
Closing the appliance door
Push the appliance door shut.
Please be aware that using magnets in
front of the wine unit door can cause it
to open by mistake. This is caused by
the door-closing mechanism on the
wine unit.
Loading ...
Loading ...
Loading ...