Loading ...
Loading ...
Loading ...
13
CORRECT LEVEL FOR FRYING MEDIUM WHEN AT
FRYING TEMPERATURE, KEEP TOPPED UP
INDICATES CORRECT FRYING MEDIUM LEVEL
WHEN COLD
2. Always ensure that scraper tool blades are
changed regularly to ensure that the scraper
tool works efficiently and prevents damage to
the griddle plate surface.
3. Clean the range castings with a stiff nylon brush
or a flexible spatula to remove any food debris.
1. The grease / spill tray(s) should be checked and
emptied frequently to prevent overflow and
spillage. Remove the spill tray(s) while still warm
so that the grease is in a liquid state. Empty any
grease from the trays and wash the trays
thoroughly in the same manner as any cooking
utensil.
2. Clean the control panel with a damp cloth light-
ly moistened with a solution of mild detergent
and water. Wipe dry with a clean dry cloth.
3. Remove the burner caps, bases, the trivets and
thoroughly clean including the splash back,
interior and exterior surfaces of the range with
hot water, a detergent solution and a soft
scrubbing brush.
4. Brush the griddle surface (optional - if fitted) with
a soft bristled brush. Any carbon deposits should
be removed using a scraper tool followed by
wiping with a cloth to prevent accumulation of
food deposits.
5. Dry the Range thoroughly with a dry cloth and
polish with a soft dry cloth.
NOTE:
If the Range usage is very high, we recommend
that the weekly cleaning procedure is carried out
on a more frequent basis.
Ensure that protective gloves are worn during the
cleaning process.
DO NOT use harsh abrasive or caustic detergents
or strong solvents as they will damage the
cooktop, burners and griddle plates (if fitted).
DO NOT use water on the trivets, griddle plates
and burners while they are still hot as cracking
may occur. Allow these items castings to cool
and remove for cleaning.
DO NOT clean the burners in a dishwasher.
Clean the Range regularly. A clean Range looks
better, will last longer and will perform better.
Carbonised grease on the surface or between the
trivets, griddle plates will hinder the transfer of heat
from the cooking surface to the food. This will result
in loss of cooking efficiency.
NOTE:
NEVER use a ribbed scraper blade on the flat
surfaced griddle plate.
DO NOT use water on the trivets, burners and griddle
plates while these items are still hot as warping and
cracking may occur. Allow these items to cool
down and then remove for cleaning. The entire
trivets, griddle plates and burner caps can be
dismantled for cleaning.
NOTE:
DO NOT use abrasive detergents, strong solvents
or caustic detergents as they could corrode or
damage the Range.
In order to prevent the forming of rust on the
trivets, griddle plate (If fitted) and burners, ensure
that any detergent or cleaning material has been
completely removed after each cleaning. The
appliance should be switched 'On' briefly to
ensure that the griddle plates become dry. Oil or
grease should be spread over the griddle surface
in order to form a thin protective greasy film.
To keep your Range clean and operating at peak
efficiency, follow the procedures shown:-
1. Clean the Griddle and Range castings using a
scraper tool to remove any build up of carbon.
Loading ...
Loading ...
Loading ...