Loading ...
Loading ...
Loading ...
11
NOTE: Only cooking pans from size Ø 150mm to
Ø 420mm are suitable fo use on these open burners.
Lighting the Open Burners (Standard / F Options)
a. Select the burner required, depress and turn the
corresponding gas control knob anti-clockwise
to the ‘HIGH’ position.
b. With the gas control knob depressed, manually
light the burner.
c. Release the gas control knob after
approximately 10-20 seconds after lighting the
burner.
d. The burner should stay alight - if not, repeat
Steps (a to (c above.
e. To achieve simmer control, depress the gas
control knob and rotate between the ‘HIGH’
and ‘LOW’ positions to achieve the temperature
required.
Lighting the Open Burners (Pilot Option)
a. Select burner required, depress and turn the gas
control knob anti-clockwise to ‘PILOT’ position.
b. Hold gas control knob depressed and manually
light pilot burner.
c. To select ‘Full Flame’, depress and rotate gas
control knob anti-clockwise to second stop
'HIGH' flame position.
d. To select ‘Low Flame’, depress and rotate gas
control knob fully anti-clockwise to ‘LOW' flame
position.
e. To achieve simmer control, depress the gas
control knob and rotate between the ‘HIGH’
and ‘LOW’ positions to achieve the temperature
required.
f. When the burner is not required, return the
burner to the ‘PILOT’ position to save gas.
Lighting the Open Burners (Pilot with Flame Failure
Option)
(Flame Failure Protection is incorporated as
standard for each burner by way of a thermo-
electric system which will shut off the gas supply to
that burner in the event that the burner goes out, so
that un-burnt gas is not expelled).
a. Select burner required, depress and turn the gas
control knob anti-clockwise to ‘PILOT’ position.
b. Hold gas control knob depressed and manually
light pilot burner.
c. Release gas control knob after approximately 10
-20 seconds after lighting pilot burner.
d. Pilot burner should stay alight - if not, repeat
Steps (b. to (c. above.
e. To select ‘Full Flame’, depress and rotate gas
control knob anti-clockwise to second stop
'HIGH' flame position.
f. To select ‘Low Flame’, depress and rotate gas
control knob fully anti-clockwise to ‘LOW' flame
position.
g. To achieve simmer control, depress the gas
control knob and rotate between the ‘HIGH’
and ‘LOW’ positions to achieve the temperature
required.
h. When the burner is not required, return the
burner to the ‘PILOT’ position to save gas.
Turning 'OFF' the Open Burners
a. When the main burner is not required, depress
and turn the gas control knob clockwise back to
the ‘OFF’ position. The 'MAIN' burner will
extinguish.
These griddles are fitted with Pilot and Flame Failure
Protection as a standard option, which is
incorporated by way of a thermo-electric system for
each main burner. Flame Failure Protection will shut
off the gas supply to that burner in the event that
the pilot for that burner goes out, so that un-burnt
gas is not expelled. This is an important safety
feature which is slowly becoming law throughout
the world.
Lighting the Griddle Burner
a. Depress the gas control knob and rotate anti-
clockwise to the ‘PILOT’ position.
b. With the gas control knob depressed, press the
piezo ignition button to ignite the pilot burner.
Repeat Items 1 to 2 until the pilot is lit.
c. Release the gas control knob approximately 10
to 20 seconds after lighting the pilot.
d. The pilot should now remain alight - if not, repeat
Steps (a. to (c. above.
e. ‘Full Flame’ can now be achieved by depressing
and rotating the gas control knob anti-clockwise
to the first stop.
f. Low flame can be achieved by depressing the
gas control knob and rotating fully anti-
clockwise to the ‘Low Flame’ position.
g. To turn 'OFF' the griddle main burner, but keep
the pilot burner alight, rotate the gas control
knob to the 'PILOT' position. The griddle burner
will extinguish and the pilot will remain alight.
Turning 'OFF' the Griddle Burner / Pilot
a. To turn 'OFF' the 'PILOT', depress and turn gas
control knob clockwise back to the ‘OFF’
position. The 'PILOT' burner will extinguish.
Always ensure that the grease tray is emptied regularly
and never allow the grease tray to overflow.
! IMPORTANT
Loading ...
Loading ...
Loading ...