Loading ...
Loading ...
Loading ...
Operating Surface Burners
WARNING 1
To avoid risk of serious personal injury, property
damage, or fire, do not leave surface burners
unattended while in operation. Grease and spillovers
can ignite causing a fire.
Adjusting Burner Flame Size
• While turning the burner control knob, watch the burner
flame.
• Flame size should match the size of the pan. Do not
allow the flame to extend up the sides of the pan.
Flames that extend up the sides of the pan can ignite
clothing, make handle hot, or burn.
, Push in and turn control knob counterclockwise to
LITE position.
• Burner should ignite within 4 seconds. If burner
does not ignite within 4 seconds turn control knob
to OFF position and follow directions in "Placing
Grates and Burner Caps" and "Before Calling for
Service" section. Try burner again. If burner still
does not ignite in 4 seconds, contact an authorized
servicer.
Adjusting Burner Flame Size
Surface Burner Control Knob
2. After gas ignites, turn control knob to desired setting.
• Each control knob can be set to any required
cooking temperature. Burner settings do not have
distinct clicks.
• Use Hlto bring food to boiling temperatures. When
food is boiling temperature setting should be
reduced.
• After lighting burner do not operate burner for long
periods of time without cookware on the grate. The
finish on the grate can chip without cookware to
absorb heat.
3. Turn control knob to OFF position when finished
cooking.
27
Loading ...
Loading ...
Loading ...