Honeywell RTH6580WF1001/U User Guide

Loading ...

11 69-2715EF—07

Connecting to your WiFi network

Note: If your WiFi network does not appear in the list on the Thermostat WiFi Setup

page:

• Try performing a network rescan by pressing the Rescan button. This is helpful in

areas with a lot of networks.

• If you are connecting to a hidden network, then enter the network SSID in the

textbox, select the encryption type from the drop down menu, and click on the

Add button. This manually adds the network to the top of the list. Click on the new

network in the list and enter the password if necessary. Click on Connect to join

the network.

3 Make sure your thermostat is connected.

While the connection is in process, your thermostat

will flash Wait for up to 3 minutes. When the

connection is complete, the display will show Wi-Fi

Setup Connection Success. The WiFi signal strength will

appear in the top-right corner.

After about 60 seconds, the home screen will

appear and Register at Total Connect will flash until

registration is complete.

If you don’t see these messages, see page 10.

To register online for remote access to your

thermostat continue on page 12.

Note: If the thermostat displays Connection Failure or continues to display

Wi-Fi Setup, confirm you correctly entered your home network password

in step 2. If correct, refer to the FAQ at honeywellhome.com/support

M33875

M33876

Loading ...

Honeywell RTH6580WF1001/U Home Wi-Fi 7-Day Programmable Thermostat