Loading ...
Loading ...
Loading ...
38
4. Refit the panes in the reverse order in which
they were removed. Reposition the internal
glass pane. Take care to center and insert the 4
pins into their housings in the oven door by
applying slight pressure.
Cooktop cleaning and maintenance
Cooktop surface
Use only a soft, dry cloth for the normal cleaning of the
surfaces. In case of persistent residues or to restore
the original surface finish, moisten a soft cloth with
water and pass it over the surface to be cleaned, let-
ting it dry naturally. For more persistent stains such as
grease/oil and any food residues (fruit juice, coffee,
tomato), remove them immediately with a soft cloth
and water. If the stains are not removed, moisten a
soft rag with a window cleaner. Gently rub the surface
to be treated, covering an area slightly larger than the
stain. Do not spray the detergent directly onto the
stain. Do not use abrasive, corrosive or acidic deter-
gents, scouring powders, stain removers, creams or
specific products for cleaning steel, ovens or dishes.
Do not use rough or abrasive cloths and sponges or
scouring pads. The use of abrasive products could
irreparably damage the surfaces.
Food stains or residues
Do not use metallic sponges or sharp scrapers as they
will damage the surfaces. Use ordinary non-abrasive
products with the aid of wooden or plastic utensils if
necessary. Rinse thoroughly and dry with a soft cloth
or a microfiber cloth. Do not allow residues of sugary
foods (such as jam) to set inside the oven. If allowed to
set for too long, sugar residue could pit the enamel lin-
ing of the oven.
Cooktop grates and burner caps
Remove from the cooktop and clean with lukewarm
water and non-abrasive detergent. Take care to
remove any encrustations. Dry thoroughly and place
them back on the cooktop.
Flame-spreader crowns and burner skirts
The flame spreaders and the burner skirts can be
removed to make cleaning easier. Wash them in hot
water and non-abrasive detergent. Carefully remove
any encrustations and wait until they are perfectly dry.
Refit the skirts making sure that they are correctly posi-
tioned in their housings with their respective flame
spreaders.
Igniters and thermocouples
If necessary, clean the igniters (1) and thermocouples
(2) with a damp cloth. Remove any dry residue with a
toothpick or needle.
Refer to the “Correct burners placement” section when
reinstalling the burner components
WARNING
ELECTRIC SHOCK HAZARD - Dis-
connect the appliance from the
power supply before carrying out
cleaning.
WARNING
DO NOT use a cooktop cleaner on a hot cooktop.
The fumes can be hazardous to your health and can
chemically damage the ceramic-glass surface.
CAUTION
Before cleaning the cooktop, make sure the controls
are turned to OFF and that the cooktop is COOL.
NOTE
Continuous contact between the grates and the
flame can lead to the enamel becoming modified on
the parts exposed to heat. This is normal and has no
effect on the operation of this component.
CARE AND CLEANING
Loading ...
Loading ...
Loading ...