Loading ...
Loading ...
Loading ...
Home > Troubleshooting > Error and Maintenance Messages
Error and Maintenance Messages
As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this
happens, your machine identifies the error or required routine maintenance and shows the appropriate message.
The most common error and maintenance messages are shown in the table.
Follow the instructions in the Action column to solve the error and remove the message.
You can correct most errors and perform routine maintenance by yourself. If you need more tips: Visit
support.brother.com/faqs.
Error Message Cause Action
2-sided Disabled
The back cover of the machine is
not closed completely.
Close the back cover of the machine until it
locks in the closed position.
The 2-sided tray is not installed
completely.
Install the 2-sided tray firmly in the machine.
Access Denied
The function you want to use is
restricted by Secure Function
Lock 3.0.
Ask your administrator to check your Secure
Function Lock Settings.
Calibration
Calibration failed.
• Press and hold down to turn off the
machine. Wait a few seconds, and then
turn it on again. Perform the color
calibration again using the LCD.
• Install a new belt unit.
• If the problem continues, contact Brother
Customer Service or your local Brother
dealer.
Cannot Detect
Your machine cannot detect the
toner cartridge.
Remove the toner cartridge and drum unit
assembly for the color that is indicated on the
LCD. Take out the toner cartridge, and put it
back into the drum unit again. Re-install the
toner cartridge and drum unit assembly back
in the machine.
See Related Information: Replace the Toner
Cartridge.
Cannot Print ##
The machine has a mechanical
problem.
• Press and hold to turn off the machine,
wait a few minutes, and then turn it on
again.
• If the problem continues, contact Brother
Customer Service or your local Brother
dealer.
Contact Brother Customer Service at:
1-877-BROTHER (1-877-276-8437) (in
USA)
www.brother.ca/support (in Canada)
or to locate a Brother Authorized Service
Center, visit:
www.brother-usa.com/support.
Cartridge Error
The toner cartridge is not installed
correctly.
Remove the toner cartridge and drum unit
assembly for the color that is indicated on the
LCD. Take out the toner cartridge, and put it
back into the drum unit again. Install the toner
cartridge and drum unit assembly back in the
machine.
If the problem continues, contact Brother
Customer Service or your local Brother dealer.
216
Loading ...
Loading ...
Loading ...