Loading ...
Loading ...
Loading ...
14
NT710 User's Manual V1.1
Table 2-2 Technical Specifications
3 Getting Started
This section describes how to power on/down the scanner, provides brief
introductions of applications loaded on the scanner and display screen layout
of the scan tool.
3.1 Powering up the Scanner
Before using the NT710 applications (including updating the scanner), please
make sure to provide power to the scanner.
The unit operates on any of the following sources:
●
Internal Battery Pack
● External Power Supply
3.1.1 Internal Battery Pack
The tablet scanner can be powered with the internal rechargeable battery.
The fully charged battery is capable of providing power for 5 hours of
continuous operation.
NOTE
Please turn off the tablet to save power when not use.
3.1.2 External Power Supply
The tablet can also be powered from a wall socket using the USB charging
adapter. The tablet also charges its internal battery pack through USB
Type-C cable.
3.2 Shutting Down the Scanner
All vehicle communication must be terminated before shutting down the
scanner. Exit the Diagnostic application before powering down.
KW81, KW82, GM UART, UART Echo Byte Protocol, Honda
Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1939, SAE
J1708,Fault-Tolerant CAN,CAN FD, DOIP
Working Temperature
-10 to 70°C
Storage Temperature
-20 to 80°C
Operating Humidity
5%-95% Non-Condensing
Dimensions
236*124*38mm (L*W*H)
Weight
0.87kg (Main unit)
Loading ...
Loading ...
Loading ...