Loading ...
Loading ...
Loading ...
22
SELF-CLEAN MODE/CARE AND MAINTENANCE
4. Be sure to rinse all parts thoroughly and to wipe
dry to avoid water marks.
NOTE: BRAND NAMES - In this section on cleaning, the
use of name brands is intended only to indicate a type of
cleaner. This is not constitute an endorsement. The omi
s
sion
of any name brand cleaner does not imply its ade-
quacy or inadequacy. Many products are regional in distribu-
tion and can be found in the local mar
k
ets and depart-
ment stores.
burners clean. It is necessary to clean the burners if
they do not light even through the igniter clicks, if there
has been a severe boil over, or when the flame does not burn
blue.
All stainless steel parts of the appliance can be cleaned
with hot soapy water, rinsed, dried and buffed to a shine
with a soft, heavy pile cloth. Make sure you clean in the
DIRECTION OF THE GRAIN and never in circular
motions as this may scratch the stainless steel.
BURNER GRATES
When lifting the grates, be careful as they are heavy. Place
them on a protected surface, so they won't scratch the
surface they are laid on.
the grates and burners are cool, remove the grate. The
Burner Cap can easily be Remove. Wash these parts in
hot soapy water, rinse and dry thoroughly. The Burner
Caps are porcelain enamel, follow the directions on the
previous page that were given for the burner grates. A
bristle brush can be used to clean out the toothed
burner ports, if necessary.
The burner grates are matte porcelain enamel over cast
iron. When cool they may be placed in the dishwasher, or
wipe while on the range top using hot soapy water, then
rinsed and wiped dry. The burner grates will not rust as
they are matte porcelain enamel on both sides for durability.
The occasional use of mild abrasive cleaners such as Bon-
Ami®, Soft Scrub®. Abrasive cleansers, used vigorously
or too often, can eventually harm the enamel. Apply with
a damp sponge, rinse thoroughly and dry.
The porcelain may pop of the edge of the grates due to
rapid temperature change when the burners are turned on, Do
not be concerned as this does not result in the deterioration of
the grates. The cast iron soon darkens to blend with the porcelain
enamel. Be careful when wiping an area where the porcelain has
popped off, as the edges may be sharp.
When cleaning this range or range-top:
1. Always use the mildest cleaning procedure first.
Some brands of cleaners of the same type are harsher
than others, read their directions. A scent or a propellant
can make a difference in the product. Read the ingredi-
ents. Try on a small area first.
2. To avoid marring the surface always rub metal finishes
in the direction of the polish (grain) lines. The
cleaner will be more effective when used in the direc-
tion of the polish lines.
3. Use only c
l
ean sponges, soft cloths, pa per towels, for
cleaning or scouring (Use only soap pads with soap
still in them. An empty pad can scratch), as rec-
ommended in this section.
After cleaning, it is important to make sure the Locat-
ing Notch at the bottom of the Burner Cap is properly
aligned with the Burner Base.
Incorrect alignment will produce a potentially
dangerous flame and poor burner performance
RANGETOP
Turn of f all the burners and allow the grates to cool before start-
ing to clean the range top. Do not clean hot sur-
faces.This could burn you. Clean only when the range
or Range
BURNERS
For proper lighting and performance keep the
MCOR SERIES
1- GRATE
2- Burner Head
3– Electrode
4- Burner Base
1
2
3
4
Loading ...
Loading ...
Loading ...