Tripp Lite 5PX2000RTG2 User Guide

Loading ...

614-40095-00

Warning: take care not to reverse the polarity + (red) and - (black) when connecting the batteries as this

willdestroy the device.

6.5 Replacing the UPS equipped with a HotSwap MBP

The HotSwap MBP module makes itpossible to service

or even replacethe UPS without affecting the

connectedloads (HotSwap function).

Maintenance

Set switch (45) to Bypass position.The red LED on the

HotSwap MBPmodule goes ON, indicating that

theload is supplied directly with AC inputsource

power.

Stop the UPS by pressing the button on the UPS

control panel. LED (43) "UPS ON - OK to switch" goes

OFF, the UPS can now be disconnected and replaced.

Return to normal operation

Check that the UPS is correctly connected to the

HotSwap MBP module.

Start the UPS by pressing the button on the UPS

control panel.LED (43) "UPS ON - OK to switch"

onthe HotSwap MBP module goes ON(otherwise,

there is a connection errorbetween the HotSwap

MBP moduleand the UPS).

Set switch (45) to Normal position.The red LED on

the HotSwap MBPmodule goes OFF.

6.6 Recycling the used equipment

Contact your local recycling or hazardous waste center for information on proper disposal of the usedequipment.

eaton.com/recycling

Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper disposal of batteries is required.

Refer to your local codes for disposal requirements.

Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes. It may be

toxic.

Do not discard the UPS or the UPS batteries in the trash. This product contains sealed, lead acid batteries andmust

be disposed of properly. For more information, contact your local recycling/reuse or hazardous wastecenter.

Do not discard waste electrical or electronic equipment (WEEE) in the trash. For proper disposal, contact yourlocal

recycling/reuse or hazardous waste center.

7 Troubleshooting

TheEaton5PXis designed for reliable, autonomous operation while providing you with notifications and alerts whenever

a potential operational or performance issue occurs.

Usually the alarms shown by the control panel do not mean that the output power is affected. Instead, they are

preventive alarms intended to alert the user.

Loading ...

Tripp Lite 5PX2000RTG2 Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS - 6 NEMA 5-20R, 1 L5-20R Outlets, Cybersecure Network Card Option, Extended Run, 2U Rack/Tower