Tripp Lite 5PX2000RTG2 User Guide

Loading ...

614-40095-00

3.5 UPS connection

Check that the indications on the name plate located on the back of the UPS correspond to the AC-power source

and the true electrical consumption of the total load.

1.Connect the UPS input cable (13) to the AC power

source.

2.Connect the loads to the UPS.It is preferable to

connect thepriority loads to the outletsmarked (3) and

the non-priorityloads to the outlets Group1, Group2 (4)

that can be programmed.

For the 5PX2000/ 3000 models, connect any high-power

devicesor matching Power Distribution Unit (PDU) to

theL5-20R or L5-30Routlet.

3.To program shutdown and startup of the Group1 and

Group2 outlets in order to extend battery runtime and

perform scheduled shutdowns, please see the "In/Out

settings" section.

3.6 Connection with a FlexPDU (Power Distribution Unit) optional module

1.Connect the UPS power cord (13) to the AC power

source.

2.Connect the input cord of the FlexPDU module (24) to

one of the UPS outlets (3).

3.Connect the equipment to the outlets (41) on the

FlexPDU module. These outlets differ, depending on the

version of the FlexPDU module.

3.7 Connection with a HotSwap MBP (Maintenance ByPass) optional module

The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connectedloads

(HotSwap function).

Loading ...

Tripp Lite 5PX2000RTG2 Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS - 6 NEMA 5-20R, 1 L5-20R Outlets, Cybersecure Network Card Option, Extended Run, 2U Rack/Tower