Tripp Lite 5PX2000RTG2 Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS - 6 NEMA 5-20R, 1 L5-20R Outlets, Cybersecure Network Card Option, Extended Run, 2U Rack/Tower

User Guide - Page 21

For 5PX2000RTG2. Also, The document are for others Tripp Lite models: 5PX1000RTG2, 5PX1000RTNG2, 5PX1500RTG2, 5PX1500RTNG2, 5PX2000RTNG2, 5PX2000RT3UNG2, 5PX3000RTG2, 5PX3000RTNG2, 5PX3000RT3UNG2, 5PXEBM48RTG2, 5PXEBM72RTG2, 5PXEBM72RT3UAG2

PDF File Manual, 42 pages, Read Online | Download pdf file

5PX2000RTG2 photo
Loading ...
Loading ...
Loading ...
614-40095-00
21
4.4 User settings
The following table displays the options that can be changed by the user.
Submenu Available settings Default settings
Local
settings
Language
[English] [Français] [Deutsch] [Español] [Русский]
[Português] [Italiano] [Simplified Chinese] [Japanese]
Menus, status, notices and alarms, UPS fault, Event Log
data and settings are in all supported languages.
English
Automatic message for user
configuration when UPS is
powered for the first time.
Date / time
Format: [International] [US] [US]
LCD
Modify LCD screen brightness and contrast to be adapted
to room light conditions.
[0]
Audible
alarm
[Enabled] [Disabled on battery] [Always disabled]
Enable or disable the buzzer if an alarm occurs.
[Enabled]
Level: [0-8] [6]
Protected
access
[Enabled] [Disabled]
Allow the user to lock the settings modification. Password
is: 0577
[Disabled]
In/Out
settings
Output
voltage
[100 V] [110 V] [120 V] [125 V] [120 V]
Input
thresholds
[Normal] [Extended]
Extended mode authorises lower input voltage(70V)witho
ut transferring to battery.
This can be used if the load can withstand low voltage
supply.
[Normal]
Sensitivity
[High] [Low]
Low sensitivity extend the range of input frequency
accepted before transferring to battery.
[High]
Load
segments
[Auto start delay]
UPS:[No delay]; Group1:[3s];
Group2:[6s]
[Auto shutdown delay]
UPS:[Disabled]; Group1:
[Disabled]; Group2:[Disabled]
Overload
prealarm
[10%] … [105%]
Load % when overload alarm occurs
[105%]
ON/OFF
settings
Start/Restart
[Cold start]
[Auto restart]
[Auto start]
[Cold start] : ON
[Auto restart] : ON
[Auto start] : OFF
Loading ...
Loading ...
Loading ...