Husqvarna R 320X AWD R 320X AWD Rider

Operator's Manual - Page 95

For R 320X AWD.

PDF File Manual, 160 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Do a check of the fuel level before each use and
refuel if it is necessary.
Do not fully fill the fuel tank. Keep a space of a
minimum 2.5 cm.
To adjust the seat
WARNING: Do not adjust the seat
during operation of the product.
1. To adjust the seat forward and rearward, put your
feet on the footrest plates.
2. Push the lever below the front edge of the seat up
and move the seat to the correct position.
To adjust height of the steering wheel
WARNING: Do not adjust the height of
the steering wheel during operation of the
product.
1. Turn the knob counterclockwise to loosen.
2. Adjust the height of the steering wheel.
3. Turn the knob clockwise to tighten.
CAUTION: Make sure that the long end
of the knob points up.
To engage and disengage the drive
system
To move the product with the engine off, the drive
system must be disengaged. Pull out the drive system
lever fully to disengage the drive on the axle. Push the
drive system lever in fully to engage the drive on the
axle. Do not use middle positions.
The drive system lever for model R 318X is found
behind the left rear wheel. Model R 320X AWD has one
drive system lever for the front and one for the rear axle.
The drive system lever for the rear axle is found behind
the left rear wheel.
The drive system lever for the front axle for R 320X
AWD is found behind the left front wheel.
To lift and lower the cutting deck
To lift the cutting deck to transport position, pull the lift
lever rearward. If the engine is on, the blades stop to
rotate automatically.
838 - 010 - 15.03.2022
95
Loading ...
Loading ...
Loading ...