Loading ...
Loading ...
Loading ...
Troubleshooting
Troubleshooting schedule
If you cannot find a solution to your problems in
this owner's manual, speak to your Husqvarna service
agent.
Problem Cause
The starter motor does not turn
the engine over
The parking brake is not applied. See
To apply and release the parking brake on
page 96
.
The lift lever for the cutting deck is in mow position. See
To lift and lower the
cutting deck on page 95
.
The main fuse is blown. See
To replace the main fuse on page 103
.
The ignition lock is defective.
The connection between the cable and the battery is bad. See
Battery safety on
page 92
.
The battery is too weak. See
To charge the battery on page 103
.
The starter motor is defective.
The engine does not start when
the start motor turns the engine
over
There is no fuel in the fuel tank. See
To fill fuel on page 94
.
The spark plug is defective.
The ignition cable is defective.
There is dirt in the carburettor or fuel line.
The engine does not run smooth-
ly
The spark plug is defective.
The carburettor is incorrectly set.
The air filter is clogged. See
To clean and change the air filter on page 102
.
The fuel tank vent is blocked.
There is dirt in the carburetor or fuel line.
The engine apparently has no
power
The air filter is clogged. See
To clean and change the air filter on page 102
.
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle cable is incorrectly adjusted.
The transmission does not have
sufficient power
The transmission cold air intake or the cooling fins are blocked.
The fan on the transmission is damaged.
There is no oil in the transmission or the oil level is too low. See
To do a check
of the transmission oil level on page 109
.
The battery does not charge The battery is defective. See
Battery safety on page 92
.
The connection at the cable connectors on the battery terminals is bad. See
Battery safety on page 92
.
110 838 - 010 - 15.03.2022
Loading ...
Loading ...
Loading ...