Loading ...
Loading ...
Loading ...
Adjusting Headrest/Harness Height
7
6. Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle
MUST face out. You MUST
use the 1st or 2nd buckle slots
when child restraint is used rear
facing. Any slot can be used when
forward facing.
1
2
3
7. Reach Under the Seat
Between Base and Shell
and Through Recline
Handle
Pull metal retainer completely
through pad and shell.
8. Check Buckle
Pull up on buckle to make sure it
is secured. The buckle
MUST not
pull out.
WARNING: Failure to place buckle’s metal retainer
completely through pad and shell can result in serious
injury or death.
WARNINGS: Make sure that the harness height is
correct for your child’s size.
Do not use this child restraint rear facing
unless the top of your child’s head is at least
1 in. (2.5 cm) below the top of the child
restraint’s headrest.
Do not use this child restraint forward facing if
the tops of your child’s ears are above the top
of the child restraint’s headrest.
Failure to follow these steps can result in
serious injury or death.
8
1. Fully Loosen Harness
Straps
Push down on harness release
lever (under fl ap on front of seat
pad) while pulling out on harness
straps as shown.
2. To Adjust Headrest/
Harness Height
Rotate headrest/harness
adjustment levers inward.
Move the headrest up or down to
the proper height for your child.
See page 5 for fi t guidelines.
Release it into slot to lock. Make
sure it is securely locked into
place.
5. From Top of Seat,
Pull Buckle Out of Shell
and Pad
Loading ...
Loading ...
Loading ...