Loading ...
Loading ...
Loading ...
XXXXX
2423
sewn
end
4. Attach 1st Harness Strap
Loops to Splitter Plate
As Shown
Sewn ends of the harness strap
loops
MUST face towards you.
DO NOT twist harness strap or
harness adjustment strap.
Make sure the same harness strap
loops are fitted COMPLETELY ON
both sides of the splitter plate.
Correct
2. Thread Harness Straps
into Shoulder Harness
Slots
If you will be using the lower
shoulder harness slots for smaller
infants, see pages 9-11.
WARNINGS: Harness system must be installed
correctly. Failure to follow these steps can result in serious
injury or death.
3. From Back, Thread
Harness Straps OVER
Metal Bar
DO NOT twist harness straps.
Accessories on Select Models
Body Pillow
When using the lower shoulder harness
slots for smaller infants, you MUST use the
body pillow.
To remove body pillow, pull buckle through
the slot in pillow and slide pillow out from
behind the harness straps.
Or from the back of seat, remove harness strap loops from splitter
plate. From the front, pull harness straps out of shell and body pillow.
Pull buckle through slot in pillow. Rethread harness straps: For lower
shoulder harness slots for smaller infants, see pages 9-11. For
upper shoulder harness slots, see page 23.
Buckle Cover
To remove buckle cover, slide the ends
out of the slot in pad. Pull up and off of the
buckle.
Harness Covers
Harness covers help provide comfort to the
neck. If harness covers will not allow proper
positioning of the chest clip or interfere with
getting a tight enough fi t for a smaller baby,
remove and do not use.
Store until child is large enough to use these
harness covers while maintaining a properly fi tting harness.
To remove harness covers, pull the fastening strips apart and remove
harness covers.
Head Pillow
To remove head pillow, gently pull tabs on
back of head pillow out of headrest pad.
To attach the head pillow, slide the tabs
on back of head pillow into headrest pad.
Loading ...
Loading ...
Loading ...