Safety 1st CC138DWU Grow and Go All-in-One Convertible Car Seat, Rear-facing 5-40 pounds, Forward-facing 22-65 pounds, and Belt-positioning booster 40-100 pounds

User Manual - Page 28

For CC138DWU.

PDF File Manual, 34 pages, Read Online | Download pdf file

CC138DWU photo
Loading ...
Loading ...
Loading ...
50
Vehicle Belt Installation
WARNINGS: Do not use the lower
anchor belt along with the vehicle lap
or lap/shoulder belt. Secure lower
anchor hooks to storage attachments
as shown when installing with vehicle
belts.
Check vehicle belt before each use.
Use only if the belt can be tightened
properly and securely.
Failure to follow these warnings can result in serious injury
or death.
2. Loosely Attach Tether
Hook to Vehicle’s
Tether Anchor
Check vehicle owner’s manual for
specific location.
49
4. Route Vehicle Lap
or Lap/Shoulder Belt
Through Forward-
Facing Belt Path
Do not twist belt. Buckle vehicle
belt.
1. Place Child Restraint
Forward Facing Flush
Against Vehicle Seat
Back
Put the child restraint into position
1.
NOTE: Do not use any recline
positions except to make the child
restraint flush against the vehicle
seat back.
Vehicle seat back must be upright.
continued on next page
3. Check if Your Vehicle
Belts Will Work With
This Child Restraint
This is very important because
not all vehicle belts will work
with child restraints.
Review pages 29-31 and your
vehicle owner’s manual to
determine what kind of vehicle
belt you have and how to lock a
child restraint in place.
5. Tighten Belt
Place hand in child restraint.
Firmly push down while pulling
shoulder belt or the free end of lap
belt to tighten.
Loading ...
Loading ...
Loading ...