Safety 1st CC138DWU Grow and Go All-in-One Convertible Car Seat, Rear-facing 5-40 pounds, Forward-facing 22-65 pounds, and Belt-positioning booster 40-100 pounds

User Manual - Page 27

For CC138DWU.

PDF File Manual, 34 pages, Read Online | Download pdf file

CC138DWU photo
Loading ...
Loading ...
Loading ...
48
6. Attach Lower Anchor
Hooks to Vehicle’s
Lower Anchors
Review your vehicle owner’s
manual for lower anchor locations
and lower anchor belt use.
7. Tighten Belt
Place hand in child restraint.
Firmly push down while pulling
free end of belt to tighten.
It may be easier to pull pull the
free end of the belt parallel with
the belt path through the Easy
Access Belt Path panel in pad as
shown.
8. Tighten Tether
Push firmly on the back of the
seat and pull the tether strap to
remove all slack and create ten-
sion on the strap.
47
9. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
To Release Lower Anchor
Belt
Remove child from child restraint.
Remove tension from the lower an-
chor belt by pushing down on side of
child restraint with the lower anchor
belt adjuster. Then press the adjuster
button to loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing hook
back into the seat bight, and twisting.
Then pull it out of the vehicle seat.
Store lower anchor belt when not
in use. See page 27.
If it moves more than 1 in. (2.5 cm),
you can try:
A. Putting your knee in the seat and pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
Loading ...
Loading ...
Loading ...