Loading ...
Loading ...
Loading ...
41
4. Route Vehicle Lap or
Lap/Shoulder Belt
Through Rear-Facing
Belt Path
42
5. Pull Vehicle Belt Across
to Opposite Side
Do not twist belt. Belt
MUST be
in front of buckle strap.
You
MUST use the 1st or 2nd
buckle slot. Do not place belt
over child’s legs. Buckle vehicle
belt.
6. Tighten Belt
Place hand in child restraint.
Firmly push child restraint down
and back towards the vehicle
seat back while pulling shoulder
belt or the free end of lap belt to
tighten.
7. Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
It should not move more than 1 in.
(2.5 cm).
8. Secure Child in Child
Restraint
Recheck the level line. Repeat
steps 2-8 if not reclined correctly.
NOTE: You may need to place
a large rolled towel(s) or foam
pool noodle(s) under front of child
restraint to help achieve the correct
recline angle. Check often to be
sure padding is still in place and the
belt is tight.
If it moves more than 1 in. (2.5 cm), you can try:
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to the lower anchor belt installation if lower
anchors are available in your vehicle.
1
2
Loading ...
Loading ...
Loading ...