Loading ...
Loading ...
Loading ...
How Does Your Child Fit? Changing Position of Buckle
65
2. Fully Recline the Child
Restraint
Pull out on recline handle and push
top of child restraint back.
1. Unbuckle Harness
Press in towards the top of the red
button.
Pull buckle tongues out.
3. Locate Buckle’s Metal
Retainer
Reach under the seat between the
base and shell and through the
recline handle.
4. Rotate Metal Retainer
and Push It Up Through
Shell and Pad
To change buckle position, see pages 6-7.
To adjust headrest/harness height, see page 8.
To make adjustments for smaller infants, see pages 9-11.
Use the guidelines below to determine if the buckle and harness strap
are in the right place for your child.
continued on next page
REAR FACING
Buckle Position
Start in the 1st slot and adjust outward as your child
grows. Buckle should be used in slot closest to your
child. The buckle should not be underneath or behind
your child. 1st or 2nd slot MUST be used.
Harness Strap Position
Harness strap MUST be at or slightly below shoul-
ders. Always choose the shoulder harness slot posi-
tion that is closest to your child’s shoulder height.
If the lower shoulder harness slots for smaller infants
are above the child’s shoulders with the headrest in
the lowest position, do not use this child restraint.
FORWARD FACING
Buckle Position
Start in the 1st slot and adjust outward as your child
grows. Buckle should be used in slot closest to your
child. The buckle should not be underneath or behind
your child. Any slot can be used.
Harness Strap Position
Harness strap MUST be at or slightly above shoul-
ders. Always choose the shoulder harness slot posi-
tion that is closest to your child’s shoulder height.
If the upper shoulder harness slots are below the
child’s shoulders with the headrest in the highest
position and the child weighs at least 40 lb (18 kg), you must convert
the child restraint to a booster seat.
1
2
3
1
2
Loading ...
Loading ...
Loading ...