Loading ...
Loading ...
Loading ...
38
9. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
If it moves more than 1 in. (2.5 cm), you can try:
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
37
10. Secure Child in Child
Restraint
Recheck level line.
Repeat steps 6-10 if not reclined
correctly.
NOTE: You may need to place
a large rolled towel(s) or foam
pool noodle(s) under front of
child restraint to help achieve the
correct recline angle.
Check often to be sure padding
is still in place and the belt is
tight.
To Release Lower Anchor
Belt
Remove child from child restraint.
Remove tension from the lower anchor
belt by pushing down on side of child
restraint with the lower anchor belt
adjuster. Then press the adjuster but-
ton to loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing hook
back into the seat bight, and twisting.
Then pull it out of the vehicle seat.
Store lower anchor belt when not
in use. See page 27.
Loading ...
Loading ...
Loading ...