Loading ...
Loading ...
Loading ...
USER MANUALPG 28
Locating the cooker
Study the diagrams below to be sure of the dimensions
required to locate the cooker safely. Make sure that
the top of the cooker is at least 10mm higher than the
level of the bench tops. Unscrew leveling legs by about
10mm to give clearance to the anti-tilt floor bracket.
The appliance has been designed to fit in a 550mm
wide gap in kitchen cabinets. The cooker may also be
installed at the end of a line of benches or with a free
space on either side.
NOTE: To ensure cooker stability, both the anti-tilt floor
bracket and anti-movement / stability bolt (this is fitted
to the cooker during and located behind the kick
panel) must be installed on all cookers (electric and
gas).
Front control models - gas
The installation of splash back
• To fit splash back, align the 2 tabs of the
splash back with the corresponding holes in
the hob and push downwards.
• Fit screws.
min 100m
min 550m
min 600m
910mm
950mm
630mm
Anti-tilt bracket
540mm
min 100m
min 550m
min 600m
910mm
1140mm
630mm
Anti-tilt bracket
540mm
Front control models Rear control models
Loading ...
Loading ...
Loading ...