Lexmark MX611DHE User's Guide PDF Lexmark MX610, MX611, MX617

Loading ...

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable

results if third-party supplies or parts are used. Imaging component usage beyond the intended life may

damage your Lexmark printer or associated components.

Warning—Potential Damage: Use of third-party supplies or parts can aect warranty coverage.

Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your

printer, press and hold

and the # button on the control panel simultaneously for 15 seconds.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and

install a genuine Lexmark supply or part.

Note: For a list of supported supplies, see the “Ordering supplies” section or go to

www.lexmark.com.

Not enough free space in

ﬂash

memory for resources [52]

Try one or more of the following:

• From the printer control panel, touch Continue to clear the message and continue printing.

• Delete fonts, macros, and other data stored in the ﬂash memory.

• Install a ﬂash memory card with larger capacity.

Note: Downloaded fonts and macros not previously stored in the

ﬂash

memory are deleted.

Paper changes needed

Try one or more of the following:

• From the printer control panel, touch Prompt for each page to continue printing.

• Tou ch Use current supplies to continue printing using the paper loaded in the tray.

• Cancel the current print job.

Parallel port [x] disabled [56]

Try one or more of the following:

• From the printer control panel, touch Continue to clear the message.

• Enable the parallel port. From the printer control panel, navigate to:

Network/Ports > Parallel [x] > Parallel

Buer

> Auto

Note: The printer discards any data received through the parallel port.

Printer had to restart. Last job may be incomplete.

From the printer control panel, touch Continue to clear the message and continue printing.

For more information, visit

http://support.lexmark.com or contact customer support.

Remove defective disk [61]

Remove and replace the defective printer hard disk.

Troubleshooting 261

Loading ...

Lexmark MX611DHE