Loading ...
Loading ...
Loading ...
Network Camera User Manual
105
7. Select a face comparison mode.
Best Comparison
The device captures and compares the target face continuously when
the face target stays in the detection area, and upload the best
scored face picture and related alarm information when the target
face leaves the area.
Quick Comparison
The device capture and compares the target face when the face
grading exceeds the set Face Grading Threshold for Capture.
Face Grading Threshold for Capture
The face grading threshold for the device to judge whether to capture and upload the face or not.
Max. Capture Interval
The max. interval between two captures when the target is in the detection area. The camera
takes the capture when it reaches the max. interval even if the face grading does not reach the set
threshold.
Quick Setup Mode
Select the mode according to actual using scenarios. In custom mode, you can set Comparison
Timeout and Comparison Times.
8. Set arming schedule. See Set Arming Schedule.
9. Set linkage method. See Linkage Method Settings.
View Face Comparison Result
Steps
1. Go to Application.
2. Set search condition and click Counting.
Matched results are shown in Face Picture Comparison Statistics area.
10.8.2 Face Modeling
Face modeling serves the purpose of collecting face pictures, creating face models and uploading
data to the surveillance center.
Before You Start
Face Capture or Multi-Target-Type detection should be configured for face picture collection. See
Face Capture or Multi-Target-Type Detection for configuration instructions.
Steps
1. Go to Configuration → Comparison and Modeling → Face Comparison and Modeling.
2. Select Face Modeling to start.
3. Check Enable Face Modeling.
Loading ...
Loading ...
Loading ...