Loading ...
Loading ...
Loading ...
Network Camera User Manual
104
one by one manually.
● The verification code for exporting and importing should be a
combination of 8 to 16 digits, containing numerics, upper case and
lower case letters.
4. Optional: Modify face information.
1) Select a face picture library.
2) Select the target face picture. You can use the search function to locate the picture by
inputting search conditions, and click Search.
3) Click Modify.
4) Edit detailed information.
Note
Face picture is not allowed to change.
5) Click OK.
5. Create models for each face picture in library.
Modeling process builds up face model for each face picture. Face model is required for face
picture comparison to take effect.
Modeling
Select one or more face pictures, and click Modeling.
Batch Modeling
Select a face picture library, and click Batch Modeling.
6. Optional: Repeat to create more face libraries.
7. Click Save.
Set Face Picture Comparison
The function compares captured pictures with face pictures in library and outputs comparison
result. Comparison result can trigger certain actions when arming schedule and linkage method
are set.
Before You Start
You should first create a face picture library and add face pictures. See Set Face Picture Library.
Steps
1. Go to Configuration → Comparison and Modeling → Face Comparison and Modeling.
2. Select Face Picture Comparison.
3. Check Enable Face Picture Comparison.
4. Select a face picture library as the reference.
5. Optional: Check Report Face Comparison Information During Multi-Target-Type Capture Alarm,
if you want to receive face comparison information during multi-target-type capture alarm.
6. Select desired face information to upload.
Loading ...
Loading ...
Loading ...