Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/66575118-gbd-h2000/bg3c.png)
Turning Off an Alarm
To stop an alarm sound and/or vibration
operation, perform the steps below to turn it
off.
●
To reactivate an alarm sound and/or
vibration operation, turn it back on.
Note
●
An indicators is displayed while any
one of the alarms is turned on.
●
The alarm indicator is not displayed
while all of the alarms are turned off.
1. Display the current time screen.
l
Watch Mode
2. Hold down (A) for at least two seconds.
This enters the Control Mode.
3. Use (A) and (D) to select [SETTING].
4. Press (C).
This displays the setting menu screen.
Pointer
5. Use (A) and (D) to move the pointer to
[WATCH SETTINGS].
6. Press (C).
This displays the watch setting screen.
7. Use (A) and (D) to move the pointer to
[ALARM].
8. Press (C).
9. Use (A) and (D) to move the pointer to the
alarm you want to turn off.
10. Press (C).
11. Use (A) and (D) to select [OFF].
12. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the alarm selection screen re-
appears.
13. Hold down (E) for at least one second to
return to the current time screen.
●
Turning off all alarms causes [ALM]
(alarm) to disappear from the display.
Note
●
If [ALM] (alarm) is still displayed after
you turn off an alarm, it means at least
one of the other alarms is still turned
on. To turn off all alarms, repeat steps
8 through 11 until the [ALM] (alarm)
indicator is no longer displayed.
●
If [ALM] (alarm) is still displayed even
after you turn off all the alarms, it
means the smart alarm is turned on.
Turn off the smart alarm.
l
Turning Off Smart Alarm
Stopwatch
The stopwatch can be used to perform 1-
second unit elapsed time measurement up to
99 hours, 59 minutes, 59 seconds.
It can also measure split times.
Measuring Elapsed Time
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [STOPWATCH].
3. Press (C).
This displays the stopwatch screen.
4. Use the operations below to measure
elapsed time.
C
C
C
C
Stop
Resume
Stop
Start
Hour, minute, second
5. Press (E) to reset the stopwatch to all
zeros.
Watch Operation Guide 3515
60
Loading ...
Loading ...
Loading ...