Loading ...
Loading ...
Loading ...
GEPpp/iances.com
!
Do not rub or clean the door gasket--
it has an extremely low resistance to
abrasion.
If you notice the gasket becoming worn,
fravedl or damaged in any way or if it has
become displaced on the door, you should
have it replaced.
C/eening the Oven Door
To clean the inside of the door:
Because die area inside die gasket is
cleaned dming the selfLclean cycle, you
do not need to clean dlis by band.
The area outside die gasket and
file door liner can be cleaned with a
soap-filled or plastic scouting pad,
hot waWr and dewrgent. Rinse well
widl a vinegar and water solution.
To dean the outside of the door:
Use soap and water to thoroughly
clean die top, sides and flont of die
oven door Rinse well You may a/so
use a glass cleaner to clean file gl_s
on die outside of die doon Do not let
water drip into die vent openings.
If any stain on the door vent trim is
pexsistent, use a soft abrasive cleaner
and a sponge-scrubber for best results.
Spillage of marinades, fluitj uices,
tomato sauces and basting maerials
containing acids m W cause
disc(_lorafion and should be wiped
up immediatel> When surface is cool,
clean and rinse.
Do not use oven cleaning, cleaning
powde_ or harsh abrasives on the
outside of the door
Slot
Hinge10ck
Pull hinge locks down to unlock
Removal position
Lift-Off Oven Door
The door is very heavy. Be careful when
removing and lifting the door.
Do not lift the door& thehandle.
Toremove the door'.
%
%
Y]
%
Fully open the doon
Pull file hinge locks down toward
the door flame, to the unlocked
posidono A tool, such as a small flat-
blade screwdfiven may be required.
Firefly grasp both sides of the door
at the top.
Close door to the door removal
position (see illustration).
Lift door up and out until the binge
arm is clear of tlle slot.
Toreplacethedoor:
[_ Firefly grasp both sides of the door
at the top.
%
Hinge.
arm
Him
10ck
I
With the Bottom Hingearm
door at the edge
same angle as 0fsi0t
the removal
position, sea the
indentation of
the binge am1
into the bottom
edge of the hinge slot. The notch
in the binge arm must be dilly
seated into the bottom of the slot.
Indentation
Fully open die doon If tlle door
will not flflly open, tlle indentation
is not seated correcdy in tile bottom
edge of the slot.
Push the hinge locks up against
the flont flame of the oven cavity;
to the locked position.
Pushhingelocks up to lock
[_ Close the oven door
Probe
The temperature probe may be cleaned
wkb soap and water or a soal>filled
scouting pad. Cool the mmperamre
probe before cleaning. Scour stubborn
spots with a soaf>filled scouting pad,
rinse and d_>
Donotimmersethetemperatureprobe
in water
Donotstorethe temperatureprobe
in theoven.
23
Loading ...
Loading ...
Loading ...