Loading ...
Loading ...
Loading ...
Minute and Seconds Setting
You can use the steps below to change the
timer start time setting in one-second
increments up to 60 minutes.
1. Display the current time screen.
l
Watch Mode
2. Use (C) to select
[
TIMER].
3. Press (A).
This displays the TIMER screen.
4. Hold down (C) for at least two seconds.
This causes a cursor to appear under the
minutes setting.
5. Use (C) to change the timer minutes
setting.
Minutes
6. Press (A).
This moves the cursor to the seconds
setting.
7. Use (C) to change the timer seconds
setting.
Seconds
●
To return to the minute setting, press
(D).
8. Press (A) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the TIMER screen re-appears.
Note
●
To exit the timer setting operation at
any point, press (D).
●
While the setting is being configured,
the watch
will exit the setting operation
automatically after about two or three
minutes of non-operation.
Using the Timer
1. Display the current time screen.
l
Watch Mode
2. Use (C) to select
[
TIMER].
3. Press (A).
This displays the TIMER screen.
4. Use the operations below to perform a
timer operation.
A
A
A
(Time up)
Resume
Pause
(Countdown starts)
Start
●
The watch performs a sound and/or
vibration operation for 10 seconds
when the end of the countdown is
reached.
●
You can reset a paused countdown to
its start time, by pressing (D).
5. Press
any button to stop the sound and/or
vibration operation.
Pedometer
You can use the pedometer to keep track of
your step count while walking, running,
engaging in your normal daily activities, etc.
Counting Steps
If you are wearing the watch correctly, the
pedometer counts your steps as you walk, run,
or engage in your normal daily activities.
Important!
●
Since this watch’s pedometer is a
wrist-worn device, it may detect non-
step movements and count them as
steps. Also,
abnormal arm movements
while walking may cause a miss count
of steps.
●
Getting Ready
To enable the most accurate step count, wear
the watch with the face on the outside of your
wrist and tighten the band securely. A loose
band
may
make it impossible to obtain correct
measurement.
NOYES
●
Counting Steps
The pedometer will start counting your steps
when you start walking.
Watch Operation Guide 3516
46
Loading ...
Loading ...
Loading ...