Loading ...
Loading ...
Loading ...
Oscilloscope Functions
USER’S MANUAL 31
Bandwidth Limit
The oscilloscope is set to full bandwidth and will pass the high frequency component in the signal if
the “BW Limit” was turned off.
The oscilloscope will reject the frequency component higher than 20MHz if the “BW Limit” was
turned on.
Invert
The invert function turns the displayed waveform 180 degrees, with respect to the ground level.
When the oscilloscope is triggered on the inverted signal, the trigger is also inverted.
Click “Invert” in “Vertical Setup” window.
The following picture shows the waveform before inversion:
The following picture shows the waveform of inversion:
Loading ...
Loading ...
Loading ...