Loading ...
Loading ...
Loading ...
67
7. Appendix
Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Indicator Messages
Power Indicator
Indicator Condition Projector Condition Note
Off The power cord is unplugged� –
Blinking light Green 0�5 sec On,
0�5 sec Off
The projector is getting ready to turn on� Wait for a moment�
Steady light Green The projector is turned on� –
Orange [NETWORK STANDBY] is selected for [STANDBY
MODE]
–
Red [NORMAL] is selected for [STANDBY MODE] –
Status Indicator
Indicator Condition Projector Condition Note
Off
Normal or Standby ([NORMAL] for [STANDBY
MODE])
–
Blinking light Red 2 cycle (0�5 sec
On, 0�5 sec Off)
Temperature error The projector is overheated� Move the projector to
a cooler location�
4 cycle (0�5 sec
On, 0�5 sec Off)
Fan error Fans will not work correctly�
6 cycle (0�5 sec
On, 0�5 sec Off)
Lamp error Lamp fails to light� Wait a full minute and then
turn on again�
Green Re-firing the lamp (The projector is cooling
down�)
The projector is re-ring.
Wait for a moment�
Steady light Green
Standby ([NETWORK STANDBY] for [STANDBY
MODE])
–
Orange Cabinet button is locked You have pressed cabinet button when Cabinet
Button is locked�
Lamp Indicator
Indicator Condition Projector Condition Note
Off Normal –
Blinking light Red Lamp has reached its end of life� Lamp
replacement message will be displayed�
Replace the lamp�
Steady light Green [ECO MODE] is set to [ON] –
Over-Temperature Protection
If the temperature inside the projector rises too high, the over-temperature protector will automatically turn off the
lamp with the STATUS indicator blinking (2-cycle On and Off.)
Should this happen, do the following:
• Unplug the power cord after the cooling fans stop.
• Move the projector to a cooler location if the room where you are presenting is particularly too warm.
• Clean the ventilation holes if they are clogged with dust.
• Wait about 60 minutes until the inside of the projector becomes cool enough.
Loading ...
Loading ...
Loading ...