NEC NP-VE281 REPLACED BY NP-VE303 User Manual

Loading ...

3. Projecting an Image (Basic Operation)

Turning off the Projector

To turn off the projector:

1. First, press the (POWER) button on the projector

cabinet or the POWER OFF button on the remote

control.

The [POWER OFF / ARE YOU SURE? /CARBON

SAVINGS- SESSION X.XXX[g-CO2]] message will appear.

2. Secondly, press the (POWER) button on the

projector cabinet, or the ENTER button or the POWER

OFF button on the remote control.

The lamp will turn off and the projector will go into standby

mode. When in standby mode, the POWER indicator will

light orange and the STATUS indicator will light green when

[NETWORK STANDBY] is selected for [STANDBY MODE].

3. Finally, unplug the power cord.

The POWER indicator will go out.

CAUTION:

Parts of the projector may become temporarily heated if the AC power supply is disconnected either during normal

projector operation or during cooling fan operation. Use caution when picking up the projector.

Power On Standby

Steady green light Steady orange light

NOTE:

• Donotturnoffthepowerfor60secondsimmediatelyafterturningitonanddisplayinganimage.

• DonotdisconnecttheACpowersupplytotheprojectorwithin10secondsofmakingadjustmentorsettingchangesandclosing

themenu.Doingsocancauselossofadjustmentsandsettings.

Loading ...

NEC NP-VE281 REPLACED BY NP-VE303 2800-Lumen High-Brightness Mobile Projector