NEC NP-VE281 REPLACED BY NP-VE303 User Manual

Loading ...

Important Information

Note for US Residents

The lamp in this product contains mercury. Please dispose according to Local, State or Federal

Laws.

Health precautions to users viewing 3D images

Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD

shutter eyeglasses or your 3D compatible content such as DVDs, video games, computer's video les and the like.

To avoid any adverse symptoms, heed the following:

- Do not use LCD shutter eyeglasses for viewing any material other than 3D images.

- Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images from too close a

distance can strain your eyes.

- Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer after every hour

of viewing.

- If you or any member of your family has a history of light-sensitive seizures, consult a doctor before viewing 3D

images.

- While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache, eyestrain, blurry

vision, convulsions, and numbness, stop viewing them. If symptoms still persist, consult a doctor.

- View 3D images from the front of the screen. Viewing from an angle may cause fatigue or eyestrain.

About High Altitude mode

• If you use the projector at altitudes approximately 1200 meters/4000 feet or higher, you are recommended to set

[FAN MODE] to [HIGH ALTITUDE]. Failure to do so may cause the projector to overheat , resulting in malfunction.

(→ page 57)

• Using the projector at high altitudes or in low air pressure can shorten the life of components.

About Copyright of original projected pictures:

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue

such as a coffee shop or hotel and employing compression or expansion of the screen image with the following

functions may raise concern about the infringement of copyrights which are protected by copyright law.

[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.

Power management function

The projector has power management functions. To reduce power consumption, the power management functions (1

and 2) are factory preset as shown below. To control the projector from an external device, use the on-screen menu

to change the settings for 1 and 2.

1. STANDBY MODE (Factory preset: NORMAL)

To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE].

NOTE:

• When[NORMAL]isselectedfor[STANDBYMODE],thefollowingconnectorsandfunctionswillnotwork:

USBport(TypeB),DDC/CI(VirtualRemoteTool).

2. AUTO POWER OFF (Factory preset: 30 minutes)

To control the projector from an external device, select [OFF] for [AUTO POWER OFF].

NOTE:

• When[0:30]isselectedfor[AUTOPOWEROFF],youcanenabletheprojectortoautomaticallyturnoffin30minutesifthereis

nosignalreceivedbyanyinputorifnooperationisperformed.

Loading ...

NEC NP-VE281 REPLACED BY NP-VE303 2800-Lumen High-Brightness Mobile Projector