NEC NP-VE281 REPLACED BY NP-VE303 User Manual

Loading ...

60

5. Using On-Screen Menu

Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)]

When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER

IN input will power on the projector and simultaneously project the computer’s image.

This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet

to power on the projector.

NOTE:

• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionin

combinationoftheAUTOPOWEROFFfunction.

• Thisfunctionwillnotbeavailableunderthefollowingconditions:

- whenacomponentsignalisappliedtotheCOMPUTERINconnector

- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied

• ToenabletheAUTOPOWERON(COMP.)afterturningofftheprojector,wait3secondsandinputacomputersignal.

 Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP.)willnotworkandtheprojector

remains in standby mode.

Enabling Power Management [AUTO POWER OFF]

When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,

15min., 20min., 30min., 1 hour) if there is no signal received by any input or if no operation is performed.

NOTE:

• Thisitemcanbeselectedonlywhen[NORMAL]isselectedfor[STANDBYMODE].

• When[NETWORKSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabledand[0:15]willbeselected

automatically.

Selecting Default Source [DEFAULT SOURCE SELECT]

You can set the projector to default to any one of its inputs each time the projector is turned on.

LAST ��Sets the projector to default to the previous or last active input each time the projector is turned on�

AUTO ��Searches for an active source in order of COMPUTER → (HDMI on VE281X/VE281/VE282X/VE282)

→ VIDEO and displays the rst found source.

COMPUTER ��Displays the computer signal from the COMPUTER IN connector every time the projector is turned

on�

HDMI

(VE281X/VE281/VE282X/VE282)

��Displays the digital source from the HDMI IN connector every time the projector is turned on�

VIDEO �� Displays the Video source from the VIDEO IN connector every time the projector is turned on�

Loading ...

NEC NP-VE281 REPLACED BY NP-VE303 2800-Lumen High-Brightness Mobile Projector