NEC NP-VE281 REPLACED BY NP-VE303 User Manual

Loading ...

5. Using On-Screen Menu

[OPTIONS(2)]

Selecting Standby condition in [STANDBY MODE]

The projector has two standby modes: [NORMAL] and [NETWORK STANDBY].

The NORMAL mode is the mode that allows you to put the projector in the normal condition which consumes less

power than the NETWORK STANDBY mode. The projector is preset for NORMAL mode at the factory.

NORMAL ��Power indicator: Red light/STATUS indicator: Off

The following connectors, buttons or functions will not work during this mode�

- USB port

- Virtual Remote Tool via the computer cable (VGA) connection

- Buttons other than POWER button on the cabinet

- Buttons other than POWER ON button on the remote control

NETWORK STANDBY ��Power indicator: Orange light/STATUS indicator: Green light

Important:

- When[NETWORKSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabled,and[0:15]willbeselected

automatically.

NOTE:

• When[CONTROLPANELLOCK],or[AUTOPOWERON(COMP.)]isturnedon,the[STANDBYMODE]settingisnotavailable.

• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO

emission reduction.

• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

Enabling Direct Power On [DIRECT POWER ON]

Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the

need to always use the POWER button on the remote control or projector cabinet.

Loading ...

NEC NP-VE281 REPLACED BY NP-VE303 2800-Lumen High-Brightness Mobile Projector