Loading ...
Loading ...
Loading ...
9
PREPARING FOR USE
1. Remove your appliance from the
packaging.
2. Check that there is no damage to the
cord or any visible damage to the body.
3. Check that all listed parts are present.
4. Remove any stickers or labels from the
appliance. DO NOT remove the rating
plate or any warnings.
5. Dispose of the packaging in a
responsible manner.
6. Locate the appliance on a stable,
horizontal, even and heat-resistant
surface in accordance with the
Important safety information section.
7. Thoroughly clean the drawer and grill
plate with hot water, some washing up
liquid and a non-abrasive sponge.
8. Wipe the inside and outside of the
appliance with a moist cloth.
9. DO NOT
frying fat or any other liquid. This is an
oil-free fryer that works on hot air.
10. Place the grill plate in the drawer.
11. DO NOT put anything on top of the
and the hot air frying will be affected as
a result.
AIR FRYER DRAWER
SAFETY SWITCH:
For your safety, this air fryer contains
a safety switch in the drawer designed
to keep if from accidentally turning on
when the frying basket and drawer are
not properly situated inside the appliance.
Before using the air fryer, please ensure
that the baskets are inside of the drawers,
the drawers are fully close.
TURNING THE APPLIANCE ON
1. Plug the unit into a mains socket. The
unit will emit an audible signal and the
before entering stand-by mode with
just the key illuminated.
2. Press the key to turn the appliance
on, this will illuminate the control panel.
3. Press the key to stop further
operation. The unit will emit an audible
signal and go into standby mode.
AUTO-OFF FUNCTION
1. When cooking is not in progress, the
appliance will automatically go into
Standby mode if there has been no
contact with the control panel for
10 minutes. The key will remain
all other indicators as well as the LED
display will go out to show the unit is in
Standby mode.
2. Press the key while the unit is in this
state to bring it out of Standby mode.
The indicators on the unit’s control
panel will light up to show the unit has
been taken out of Standby mode.
3. Once the unit is out of Standby mode,
press any of the compartment selection
keys to activate the control panel for
the corresponding compartment(s).
BEFORE FIRST USE
Loading ...
Loading ...
Loading ...