Loading ...
Loading ...
Loading ...
11
9b. If the food is ready, empty the basket
into a bowl or onto a plate. Take care
when doing so, as excess oil from
cooking may leak onto the ingredients.
9c. When a batch of food is ready, the
appliance is instantly ready for
preparing another batch. However, if
the appliance is not required for further
cooking, turn it off and unplug it from
the mains socket. Leave the drawer(s)
open to allow the unit to cool down
more quickly.
NOTE: When cooking on the Fries/Chips
pre-set, there will be a sound prompt
halfway through. When this sounds, take
the cooking basket out of the air fryer oven,
shake the ingredients for a few seconds,
then place the basket back inside the
corresponding compartment and close the
door. The unit will automatically resume
cooking on the standard pre-set settings.
NOTE: Alternatively, refer to the diagram
printed at the top of the unit for
information on the default times and
temperatures for each pre-set.
MENU
DEFAULT
TIME (MIN)
DEFAULT
TEMP (ºC)
Fries/Chips 18 200
Toast 5 190
Cake 25 150
Vegetables 15 150
Dehydrate 20 hours 50
Reheat 3 180
Keep Warm 120 60
Chicken 30 180
Chicken Wings 18 175
Steak 12 160
Fish 15 170
Prawns 13 170
Defrost 15 45
PRE-SET MENU SELECTION
(Once plugged in and in stand-by)
1. Place the food in the compartments,
2. Press the key.
3. Press the
A
,
B
or
A+B
key to select
the desired compartments.
4. Press the corresponding icon for each
pre-set on the unit’s control panel
to activate it. There will be a sound
prompt, the icon for the selected
default time and temperature settings
for that program will be displayed on
the unit’s LED screen to indicate that
pre-set has been selected
5. If using both compartments to cook
separate pre-sets, press the icon for
the opposite compartment to the one
selected, and repeat steps 4 and 5.
6. Once the desired pre-set menus have
been set, press the Start/Stop key to
start the cooking process. The digits
on the unit’s control panel will stop
operate to show the cooking process is
under way.
NOTE! If there is no input on the control
selected, the cooking cycle for that pre-set
will begin automatically.
7. When the operation time has elapsed
there will be an audible signal, the
heating element will stop working and
the unit will go into Standby mode to
show the cooking cycle is complete.
8. Open the corresponding
compartment(s) and take out the
cooking racks or remove the food
directly.
9. Check if the food is ready.
9a. If the food is not ready yet, return the
drawer to the appliance and set the
timer for a few extra minutes, then
press the Start/Stop key.
Loading ...
Loading ...
Loading ...