Loading ...
Loading ...
Loading ...
Global Mode
Settings Page
6-5
SysEx ID
e SysEx ID parameter sets the ID number for the unit if you are using more than one
device with the same MIDI manufacturer ID number. You can set this parameter to any
number from 0 to 127.
Unless you have multiple SP6 keyboards receiving SysEx messages from a single source, you
will not need to change the SysEx ID from the default setting of 0.
If you do have multiple SP6s receiving SysEx messages from a single source, make sure each
SP6 has a dierent SysEx ID. is will allow you to direct SysEx messages to the appropriate
SP6 by specifying which unit with the SysEx ID byte that’s included with every SysEx
message.
To have the unit respond to SysEx messages regardless of the SysEx ID, set SysEx ID to 127.
LCDContras
Use the LCDContras parameter to adjust the contrast of the LCD display.
BankMode
e BankMode parameter determines the MIDI controller number(s) that will be used to
select MIDI Program Banks.
When using an external MIDI device to send MIDI bank change messages to the SP6,
dierent manufacturers may use dierent MIDI controller numbers for sending bank change
messages (usually 0, 32, or both 0 and 32). You can use the BankMode parameter to ensure
that the SP6 responds to bank change messages from external MIDI devices. Set BankMode
to any of the following settings:
Ctl 0 MIDI Bank change messages are received with controller number 0.
Ctl 32 MIDI Bank change messages are received with controller number 32.
Ctl 0/32 MIDI Bank change messages are received with both controller numbers 0 and 32.
FXMode
e FXMode parameter determines how eects resources are used in Program Mode.
Use the Perform setting when playing a single Program in Program Mode. With FXMode
set to Perform, the SP6 minimizes disruption of eects when changing Programs or MIDI
channels in Program Mode.
When controlling the SP6 from an external sequencer to play multiple channels in Program
Mode, setting FXMode to MultiTrk allows eects to be loaded on more MIDI channels,
although eects may be momentarily disrupted when changing Programs or MIDI channels.
Loading ...
Loading ...
Loading ...