Loading ...
Loading ...
Loading ...
To end the recording, press the button on the remote control during recording and
select Record.
Matters That Require Attention of Recording
While recording, press the Wheel (OK) button to display information about the recording.
You can set recording time before the recording starts, and during the recording, you can
change the time by selecting the Record button.
Because of the content protection technology used, the recorded video cannot be played
on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is
replaced.
Do not remove the USB cable while recording.
If you force your TV to power off while recording, the recorded content may not be saved.
Ideally, you should stop the recording and check that the programme has been recorded
before turning the TV off.
The configurable items differ depending on model.
Some functions may not be available while recording is in progress.
Only broadcast programmes you view through the antenna input terminal can be recorded.
Bluetooth and the USB port may not work properly when recording with a USB storage
device.
Recordings that are less than 10 seconds long will not be saved.
You can save up to 600 pieces of content on a single partition.
About USB storage devices for recording
The recordable time may vary depending on the capacity of your USB storage device.
Upon the initial attempt to record to the USB memory, the TV will perform a performance
test. Start recording after the test has been completed normally.
If your remote control does not have a button, press and hold the button.
33
Loading ...
Loading ...
Loading ...