Loading ...
Loading ...
Loading ...
38
:INSTrument:ISUMmary<n>:ENABle?
SYSTem:ERRor?
*CLS
*ESE <enable value>
*ESE?
*ESR?
*OPC
*OPC?
*PSC {0|1}
*PSC?
*SRE <enable value>
*SRE?
*STB?
*WAI
RS-232 Interface Commands
SYSTem
:LOCal
:REMote
:RWLock
Simplified Programming Overview
This chapter gives an overview of the basic commands used to program the power
supply over the remote interface. Some of them are the SCPI-confirmed commands,
and some are the device-specific commands. It is unnecessary to differentiate them
when using ARRAY 367X.
Using the APPLy Command
The APPLy command provides the most straightforward method to program the
power supply over the remote interface, such as to control one output or triple outputs
of power supply, and to read the immediate output value of each supply. Give the
following example to illustrate:
APPLY 3.3,2.0 Set the supply to an output of 3.3V rated at 2.0A
APLLY 12.0,0.5 Set the supply to an output of 12.0V rated at 0.5A
Using the Low-Level Commands
The main feature of the low-level commands is to provide you with more flexibility to
change or query the individual parameters than the APPLy command. Give the
following example to illustrate how to use the low-level commands to set the supply
to an output of 5.0V rated at 4.0A:
Loading ...
Loading ...
Loading ...