Loading ...
Loading ...
Loading ...
Cleaningthe glass cooktop. Consomemode/s;
Clean yourcooktopafter
each spill. Use CERAMA
BRYTE® CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONAW use CERAMABRYTE®Ceramic
Cooktop Cleaneron the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERANA
BRYTE® Ceramic Cooktop Cleaner.
This helps protect the top and makes
cleanup easier.
[] Daily use of CERANABRYTE®Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
[]
%
Shakethe cleaning cream well.
Apply a few drops of CERAMABRYTE®
Ceramic Cooktop Cleaner directly
to the cooktop.
Usea paper towel or CERAMA
BRYTE®Cleaning Padfor Ceramic
Cooktopsto clean the entire cooktop
surface.
r_ use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is verF important that Fou DO
NOT heat the cooktop until it has been
cleaned thoroughlF.
Usea CEFIAMABFIYTE®CleaningPadfor
CeramicCo@tops.
Burned-On Residue
NOTE:DAMAGEto Four glass surface
roof occur if Fou use scrub pads other
than those recommended.
I-7-1 Allow the cooktop to cool.
[] Spread a few drops of CERAIA
BRYTE®Ceramic Cooktop Cleaner on
the entire burned residue area.
[]
Using the included CERANABRYTE®
Cleaning Padfor Ceramic Cooktops,
rub the residue area, applying
pressure as needed.
%
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE®Ceramic Cooktop Cleaner
and a paper towel.
The CEFIAMABRYTE® CeramicCo@top
Scraperand all recommendedsupplies
are availablethrough our PartsCenter.
Seeinstructionsunder"To OrderParts"
sectionon next page.
NOTE:Bo not usea dull or
nickedblade.
Heavy, Burned-On Residue
ryl
[]
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surface and
scrape the soil. It will be necessary
to apply pressure to the razor
scraper in order to remove
the residue.
@
After scraping with the razor
scraper, spread a few drops of
CERAMABRYTE®Ceramic Cooktop
Cleaneron the entire burned residue
area. Use the CERAMABRYTE®
Cleaning Padto remove any
remaining residue.
[]
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE®Ceramic Cooktop Cleaner
and a paper towel.
z_2
Loading ...
Loading ...
Loading ...