Loading ...
Loading ...
Loading ...
Usingthe self-cleaning upper and lower ovens.
The oven doors must be closed and all controls set correctly for the cycle to work properly.
[]DD[]D
DDDD
How to Delay the Start of Cleaning
F-_ Touch the SELFCLEAN pad.
A ]-hour self-clean time is
recommended for use when cleaning
small, contained spills.A self-clean
time of 5 hours is recommended
for a dirtier oven.
If a time other than 5 hours or 3 hours
is needed,use the number pads and
enter the desired clean time.
Youcan change the clean time to any time
between ] hours and 5 hours, depending
on how dirty your oven is.
F3] Touch the DELAVSTARTpad.
[] Using the number pads,enter the time
of day you want the clean cycle to
start.
[] Touch the START pad.
The upper and lower oven doors lock
automatically. The cooktop elements are
also locked out during self-clean. The
display will show the start time. It will not
be possible to open the oven doors or use
the cooktop until the temperature drops
below the lock temperature and
LOCKED/DOOR_ goes off in the control
display.
When LOCKED/DOOR _ goes off, you will
be able to open the doors.
After a Clean Cycle
Youmay notice some white ash in the
oven.Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with
a soap-filled steel wool pad and rinse
thoroughlg with a vinegar and water
mixture.
Thesedeposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
Youcannot set the oven for cooking or
another self-clean cycle until the oven is
cool enough for the door to unlock.
While the oven is self-cleaning, you can
touch the CLOCKpad to display the time
of day. To return to the clean countdown,
touch the SELFCLEAN pad.
Ifthe racks become hard to slide,
apply a small amount of cooking oil
to a paper towel and wipe the edges
of the oven racks with the paper towel.
30
Loading ...
Loading ...
Loading ...