Loading ...
Loading ...
Loading ...
SECTION 4: UNPACKING INSTRUCTIONS
REMOVE UNIT FROM CARTON
• See Figure 3,
• Remove staples, break glue on top flaps, or cut tape at oarto_ end and peel along top flap to open
carton.
• Remove loose parts if Included with unit (i.e., owner's manual, etc.).
• Cut along dotted lines and lay carton down flat.
• Remove packing material
Roll or slide unit out of carlon. Check carton thoroughly for loose parts.
REMOVE MANUAL & LOOSE PARTS
Figure 3
DISCONNECT SPARK PLUG WIRE
Before setting up your lawn mower, disconnect the spark plug wire from the spark plug, and ground it against
the engine by attaching rubber boot to a bolt or metal clip to the grounding post on the engine, See Figure 4.
Spark Plug
Figure 4
Loading ...
Loading ...
Loading ...