Loading ...
Loading ...
Loading ...
NOTE: Only move the shift lever when the engine is running. Changing the shift lever setting with the
engine off can cause damage to the mower.
CUTTING HEIGHT ADJUSTMENT LEVER
The cutting height adiustment lever is located above the left rear wheel. To adjust the culting height, pull the
lever out and away from lhe mower and then move it forward or back for a new cutting height. See Figure 6.
g Height Adjustment Lever
Figure 6
NOTE: For rough or uneven lawns, move the height adjustment lever to a higher position. This will help
stop scalping.
ENGINE CONTROLS
See the engine manual for the Iooationand funclionof the controls located on the engine.
SECTION 7: OPERATION
_lb WARNING: Keep bands and feet away from the chule area on cutting deck. The operation of
any lawn mower can result in foreign objects being thrown into the eyes, which can result in severe
eye damage. Always wear safety glasses or eye shields.
NOTE: For best results raise the cutting position until it is determined whlch height is best for your lawn. See
CUqI'FING HEIGHT ADJUSTMENT LEVER in the CONTROLS section.
GAS AND OIL FILL;UP
Service the engine with gasofine and oil as Instructed tn the separate engine manual. Read all instructions
carefully.
WARNING: Never fill fuel tank indoors, with engine running or until the engine has been allowed
to cool for at least two minutes after running.
Loading ...
Loading ...
Loading ...