Loading ...
Loading ...
Loading ...
DRIVE BELT REMOVAL AND REPLACEMENT (Model 370 Series)
If you need to replace a worn or broken drive belt, follow steps1 through22.
Step 1,
Step 2,
Step 3.
Step 4.
Disconnect the spark plug and ground it.
Drain the fuel tank. '
Remove rear hub caps and wheels.
Remove eight phillips head screws,
(Behind Wheel
/7
_tep 5,
gtep 6.
Step 7.
Step 8.
Step g.
Blade _"
Tip mower back on its handle and block
securely.
Remove blade and blade adapter.
Remove three hex head screws holding
smag baffle.
Remove small baffle,
Remove large baffle,
Small
Large Baffle
Hex Head Screw
Step 10. Loosen hex lock nut holding Fdler bearing.
Step 11. Push back and rotate belt keeper.
Step 12, Remove and replace belt.
Step 13. Replace belt Imeper to Its original
position. Tighten the hex lock nut.
Belt Keeper
Hex Lock Nut
Mower shown !ipped on engine for clari!y,
Remember, only bp mower back on ds handle wdh
the spark plug facing up. Othet_vlse, oil will spill il
turned upside down.
19
Loading ...
Loading ...
Loading ...